Микросхема TPS5430DDA

Характеристики

TPS5430DDAThe TPS5430DDA is a 3A 500kHz Step-down Converter with Eco-mode™ that integrates a low-resistance, high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions, an under-voltage-lockout circuit to prevent start-up until the input voltage reaches 5.5V, an internally set slow-start circuit to limit inrush currents and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18µA typically. Other features include an active-high enable, over-current limiting, over-voltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS5430 feedback loop is internally compensated. The TPS5430 regulates a wide variety of power sources including 24V bus.

• Up to 3A continuous (4A peak) output current
• High efficiency up to 95% enabled by 110mR integrated MOSFET switch
• Wide output voltage range (adjustable down to 1.22V with 1.5% initial accuracy)
• Internal compensation minimizes external parts count
• Improved line regulation and transient response by input voltage feed-forward
• System protected by over-current limiting, overvoltage protection and thermal shutdown
• Green product and no Sb/Br

Микросхемы / Микросхемы управления питанием / Импульсные преобразователи
Корпус: 8-SO PowerPad, инфо: REG BUCK ADJ 3A 8SOPWRPAD